S-CSA HEX 6x35/1 ML Concrete Screw
ARTICLENUMBER9640071404
ETA-approved 6 mm concrete screw for cracked and non-cracked concrete
- Self-tapping, approved screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- ML (Multi Layer) corrosion protection coating tested 2016 hours in SST acc. ISO 9227 and then fulfills the requirements for the neutral salt spray test with the corrosion class „C3 very high“ according to DIN EN ISO 12944-6:2018-06.
- For outdoor use in not safety relevant applications.
Product overview
Packaging
Carton: 100 / Pack: 500 / Pallet: 28000Weight
15.5 gEAN
6416031714047Material
steelSurface
galvanic ZNSuitable Conditions
Dry indoor, Humid indoor, rural outdoorApplications
- Facade scaffoldings
- Temporary fixings
- Seatings
- Shelves
- Cable racks
- Handrails
- Battens
Base Material
Approved for
Cracked concrete
Hollow core slab
Non cracked concrete
Suitable for
Solid clay brick
Solid sand-lime brick
Technical Data
Length (L)
36 mmDrill hole diameter (d0)
6 mmFixture thickness (tfix,1)
1 mmOuter drive
AF13Inner drive
TX30Hole in fixture (df)
9 mmNominal setting depth (hnom,1)
35 mmEffective setting depth (hef,1)
27.6 mmDrill hole depth (h1,1)
45 mmHead diameter (dk)
16.5 mmInstallation torque max (Nm) (Tinst)
14Minimum base material thickness (hmin,1)
80 mmElectrical number (FI)
1324187HEPAC number (FI)
3255701Approvals / Certificates
Installation
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Cracked concrete, C20/25 | NRec | 35 mm | 1,4 kN | ||
| Cracked concrete, C20/25 | VRec | 35 mm | 5,4 kN | ||
| Non cracked concrete, C20/25 | NRec | 35 mm | 1,4 kN | ||
| Non cracked concrete, C20/25 | VRec | 35 mm | 5,4 kN | ||
| Hollow core slab, bottom flange thickness 25 mm | NRec | 35 mm | 1,2 kN | ||
| Hollow core slab, bottom flange thickness 25 mm | VRec | 35 mm | 1,2 kN |