S-CSA+ HEX 10x70/15 ML Concrete Screw
ARTICLENUMBER9640071751
ETA-approved heavy-duty concrete screws for high loads
- Self-tapping, screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- Seismic performance category C2 with hef,2.
- ML (Multi Layer) corrosion protection coating exceeding 1000 hours in SST acc. ISO 9227.
- For outdoor use in not safety relevant applications.
Product overview
Packaging
Carton: 25 / Pack: 125 / Pallet: 7000Weight
56.4 gEAN
6416031717512Material
steelSurface
galvanic ZNSuitable Conditions
Dry indoor, Humid indoor, rural outdoorApplications
- Facade scaffoldings
- Temporary fixings
- Seatings
- Shelves
- Cable racks
- Handrails
- Battens
Base Material
Approved for
Cracked concrete
Non cracked concrete
Suitable for
Solid clay brick
Solid sand-lime brick
Technical Data
Length (L)
70 mmFixture thickness (tfix,1)
15 mmOuter drive
AF15Drill hole diameter (d0)
10 mmHole in fixture (df)
14 mmNominal setting depth (hnom,1)
55 mmEffective setting depth (hef,1)
42.5 mmDrill hole depth (h1,1)
65 mmHead diameter (dk)
20.5 mmInstallation torque max (Nm) (Tinst)
85Minimum base material thickness (hmin,1)
100 mmHEPAC number (FI)
3255584Approvals / Certificates
Installation
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Cracked concrete, C20/25 | NRec | 55 mm | 3,6 kN | ||
| Cracked concrete, C20/25 | VRec | 55 mm | 13,6 kN | ||
| Non cracked concrete, C20/25 | NRec | 55 mm | 6,5 kN | ||
| Non cracked concrete, C20/25 | VRec | 55 mm | 18,2 kN |