S-CSA+ HEX 10x80/10/25 ML Concrete Screw
ARTICLENUMBER9640071757
ETA-assessed heavy-duty concrete screws for high loads
- Self-tapping, screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- Seismic performance category C2 with hef,2/hef,3 (ETA-20/0446).
- ML (Multi Layer) corrosion protection coating tested 2016 hours in SST acc. ISO 9227 and then fulfills the requirements for the neutral salt spray test with the corrosion class „C3 very high“ according to DIN EN ISO 12944-6:2018-06.
- For outdoor use in not safety relevant applications.
Product overview
Properties
Hexagon head with flangePackaging
Carton: 25 / Pack: 125 / Pallet: 7000Weight
61.7 gEAN
6416031717574Material
steelSurface
galvanic ZNSuitable Conditions
Dry indoor, Humid indoor, rural outdoorApplications
- Facade scaffoldings
- Seatings
- Shelves
- Cable racks
- Handrails
- Battens
Base Material
Approved for
Non cracked concrete
Cracked concrete
Suitable for
Solid clay brick
Solid sand-lime brick
Technical Data
Length (L)
80 mmDrill hole diameter (d0)
10 mmFixture thickness (tfix,1)
25 mmFixture thickness (tfix,2)
10 mmOuter drive
AF15Hole in fixture (df)
14 mmNominal setting depth (hnom,1)
55 mmNominal setting depth (hnom,2)
70 mmEffective setting depth (hef,1)
42.5 mmEffective setting depth (hef,2)
55.3 mmDrill hole depth (h1,1)
65 mmDrill hole depth (h1,2)
80 mmHead diameter (dk)
20.5 mmInstallation torque max (Nm) (Tinst)
85Minimum base material thickness (hmin,1)
100 mmMinimum base material thickness (hmin,2)
112.8 mmHEPAC number (FI)
3255585Approvals / Certificates
Installation
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Non cracked concrete, C20/25 | NRec | 55 mm | 6,5 kN | ||
| Non cracked concrete, C20/25 | VRec | 55 mm | 18,2 kN |