S-CSA+ HEX 10x90/5/35 ZP Concrete Screw
ARTICLENUMBER9640071762
ETA-approved heavy-duty concrete screws for high loads
- Self-tapping, screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- Seismic performance category C2 with hef,2.
- ZP for dry indoor use.
Product overview
Packaging
Carton: 25 / Pack: 125 / Pallet: 7000Weight
68.1 gEAN
6416031717628Material
steelSurface
zinc-platedSuitable Conditions
Dry indoorApplications
- Facade scaffoldings
- Temporary fixings
- Seatings
- Shelves
- Cable racks
- Handrails
- Battens
Base Material
Approved for
Cracked concrete
Non cracked concrete
Suitable for
Solid clay brick
Solid sand-lime brick
Technical Data
Length (L)
90 mmDrill hole diameter (d0)
10 mmFixture thickness (tfix,1)
35 mmFixture thickness (tfix,2)
5 mmOuter drive
AF15Hole in fixture (df)
14 mmNominal setting depth (hnom,1)
55 mmNominal setting depth (hnom,2)
85 mmEffective setting depth (hef,1)
42.5 mmEffective setting depth (hef,2)
68 mmDrill hole depth (h1,1)
65 mmDrill hole depth (h1,2)
95 mmHead diameter (dk)
20.5 mmInstallation torque max (Nm) (Tinst)
85Minimum base material thickness (hmin,1)
100 mmMinimum base material thickness (hmin,2)
130 mmElectrical number (FI)
1310889HEPAC number (FI)
3255564Approvals / Certificates
Installation
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Cracked concrete, C20/25 | NRec | 55 mm | 3,6 kN | ||
| Cracked concrete, C20/25 | VRec | 55 mm | 13,6 kN | ||
| Cracked concrete, C20/25 | NRec | 85 mm | 9,0 kN | ||
| Cracked concrete, C20/25 | VRec | 85 mm | 20,1 kN | ||
| Non cracked concrete, C20/25 | NRec | 55 mm | 6,5 kN | ||
| Non cracked concrete, C20/25 | VRec | 55 mm | 18,2 kN | ||
| Non cracked concrete, C20/25 | NRec | 85 mm | 13,1 kN | ||
| Non cracked concrete, C20/25 | VRec | 85 mm | 20,1 kN |