S-CSA+ HEX 14x100/35 SW21 ML Concrete Sc
ARTICLENUMBER9640071813
ETA-approved heavy-duty concrete screws for high loads
- Self-tapping, screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- Seismic performance category C2 with hef,2.
- ML (Multi Layer) corrosion protection coating exceeding 1000 hours in SST acc. ISO 9227.
- For outdoor use in not safety relevant applications.
Product overview
Packaging
Carton: 10 / Pack: 50 / Pallet: 2800Weight
150 gEAN
6416031718137Material
steelSurface
galvanic ZNSuitable Conditions
Dry indoor, Humid indoor, rural outdoorApplications
- Facade scaffoldings
- Temporary fixings
- Seatings
- Shelves
- Cable racks
- Handrails
- Battens
Base Material
Approved for
Cracked concrete
Non cracked concrete
Suitable for
Solid clay brick
Solid sand-lime brick
Technical Data
Length (L)
100 mmDrill hole diameter (d0)
14 mmFixture thickness (tfix,1)
35 mmOuter drive
AF21Hole in fixture (df)
18 mmNominal setting depth (hnom,1)
65 mmEffective setting depth (hef,1)
49.3 mmDrill hole depth (h1,1)
75 mmHead diameter (dk)
28 mmInstallation torque max (Nm) (Tinst)
100Minimum base material thickness (hmin,1)
120 mmHEPAC number (FI)
3255592Approvals / Certificates
Installation
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Cracked concrete, C20/25 | NRec | 65 mm | 4,0 kN | ||
| Cracked concrete, C20/25 | VRec | 65 mm | 18,7 kN | ||
| Non cracked concrete, C20/25 | NRec | 65 mm | 7,1 kN | ||
| Non cracked concrete, C20/25 | VRec | 65 mm | 26,8 kN |