S-CSA HEX 6x50/5 SW13 A4 Concrete screw
ARTICLENUMBER9640071970
ETA-approved heavy-duty concrete screws for high loads
- Self-tapping, stainless A4 screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- A4 for indoor, outdoor and industrial use.
Product overview
Packaging
Carton: 100 / Pack: 500 / Pallet: 28000Weight
18.8 gEAN
6416031719707Material
stainless steel A4 / steelSurface
zinc-platedSuitable Conditions
Dry indoor, Humid indoor, rural outdoor, OutdoorApplications
- Facade scaffoldings
- Temporary fixings
- Seatings
- Shelves
- Cable racks
- Handrails
- Battens
Base Material
Approved for
Cracked concrete
Non cracked concrete
Suitable for
Solid clay brick
Solid sand-lime brick
Technical Data
Length (L)
50 mmDrill hole diameter (d0)
6 mmFixture thickness (tfix,1)
5 mmOuter drive
AF13Hole in fixture (df)
9 mmNominal setting depth (hnom,1)
45 mmEffective setting depth (hef,1)
34 mmDrill hole depth (h1,1)
55 mmHead diameter (dk)
16.5 mmInstallation torque max (Nm) (Tinst)
14Minimum base material thickness (hmin,1)
80 mmElectrical number (FI)
1324148HEPAC number (FI)
3255737Approvals / Certificates
Installation
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Cracked concrete, C20/25 | NRec | 45 mm | 1,2 kN | ||
| Cracked concrete, C20/25 | VRec | 45 mm | 6,8 kN | ||
| Non cracked concrete, C20/25 | NRec | 45 mm | 2,9 kN | ||
| Non cracked concrete, C20/25 | VRec | 45 mm | 6,8 kN |