DIY S-CSA CS 6x100/55/45 T30 A4 (6PCS)
ARTICLENUMBER9640095884
ETA-approved A4 concrete screw for cracked and non-cracked concrete (Size: 6 mm)
- Self-tapping, stainless A4 screw anchors for push-through installations.
- Requires a small drill hole diameter. No prescribed tightening torque.
- No expansion forces allowing for small edge distances and spacings.
- Fully removable.
- A4 for indoor, outdoor and industrial use.
Product overview
Properties
Countersunk head, torx drivePackaging
Bag: 6 / Carton: 6 / Pack: 30Weight
23.8 gEAN
6416031958847Material
stainless steel A4 / steelSurface
zinc-platedSuitable Conditions
Dry indoor, Humid indoor, rural outdoor, OutdoorApplications
- Facade scaffoldings
- Temporary fixings
- Seatings
- Shelves
- Cable racks
- Handrails
- Battens
Base Material
Approved for
Cracked concrete
Non cracked concrete
Suitable for
Solid clay brick
Solid sand-lime brick
Technical Data
Length (L)
100 mmDrill hole diameter (d0)
6 mmFixture thickness (tfix,1)
55 mmFixture thickness (tfix,2)
45 mmInner drive
TX30Hole in fixture (df)
9 mmNominal setting depth (hnom,1)
45 mmNominal setting depth (hnom,2)
55 mmEffective setting depth (hef,1)
34 mmEffective setting depth (hef,2)
42.5 mmHead diameter (dk)
14 mmInstallation torque max (Nm) (Tinst)
14Minimum base material thickness (hmin,1)
80 mmMinimum base material thickness (hmin,2)
100 mmElectrical number (FI)
1324227Approvals / Certificates
Installation
Performance Data
Load type | Embedment depth (hnom) | Load direction | Load value | ETA | |
|---|---|---|---|---|---|
| Cracked concrete, C20/25 | NRec | 45 mm | 1,2 kN | ||
| Cracked concrete, C20/25 | VRec | 45 mm | 6,8 kN | ||
| Cracked concrete, C20/25 | NRec | 55 mm | 1,7 kN | ||
| Cracked concrete, C20/25 | VRec | 55 mm | 6,8 kN | ||
| Non cracked concrete, C20/25 | NRec | 45 mm | 2,9 kN | ||
| Non cracked concrete, C20/25 | VRec | 45 mm | 6,8 kN | ||
| Non cracked concrete, C20/25 | NRec | 55 mm | 4,5 kN | ||
| Non cracked concrete, C20/25 | VRec | 55 mm | 6,8 kN |