Sormat

Share this page with someone

characters remaining

ITH 410 Ve Injection resins, vinylester

Hi-performance vinylester injection resin for cracked concrete

  • Rapid-curing, styrene-free, two component vinylester injection resin for bonding studs, bolts and rebars into drilled holes.
  • Approvals cover also post-installed rebar connections, overhead installations, water filled holes and variable installation depths.
  • High chemical resistance, LOW VOC content, NSF Certified for contact with drinking water, LEED tested, temperature resistance -40 °C - +120 °C.
  • Store partially used cartridge with mixer on. Change mixer before reusing.
  • Mixing nozzle is included with each cartridge. Large cartridge size especially for professional use and serial installations.
  • Suitable conditions related to stud and rebar material qualities: ZP for dry indoor and temporary outdoor use; HGD/MG and A2 for dry and humid indoor use, outdoor in rural areas only; A4 for indoor, outdoor and industrial use; HCR for extremely corrosive conditions.

Technical features

Properties
Vinylester resin, 410 ml cartridge
Material
Resin
Suitable conditions
Dry indoor / Humid indoor, rural outdoor / Outdoor / Underwater

Applications

  • Heavy steel constructions
  • Railings
  • Roads and bridges
  • Masts
  • Base plates
  • Machines
  • Harbour constructions
  • Underwater applications
  • Damp and waterfilled boreholes
  • Close edge applications
  • Small anchor spacings

Base materials

Approved for
  • Aerated concrete block
  • Cracked concrete
  • Hollow light expanded clay aggregate block
  • Non-cracked concrete
  • Perforated clay brick
  • Perforated sand-lime brick
  • Solid clay brick
  • Solid light expanded clay aggregate block
  • Solid sand-lime brick
Also suitable for
  • Hollow-core slab
  • Natural stone

ITH 410 Ve Products

Type Code Eta approval Other
ITH 410 Ve 9640072901 Yes

Additional information

News

Articles