High-performance epoxy bonded fastener for use in concrete and systems for post-installed rebar connections with mortar

• SE1000 Seismic is an ETA Option 1-approved, two component, high-performance pure epoxy resin for bonding studs, bolts and rebars. Recommended for professional use only.
• SE1000 is ideally suited for demanding and safety critical applications with high load requirements. SE1000 works great in oversized holes with large-diameter studs etc. Extended gel time is convenient when the resin is used in deep boreholes and high ambient temperatures.
• Ideal for post-installed rebar used in structural connections. Suitable for use in waterfilled boreholes, in overhead installations and in diamond drilled boreholes. SE1000 offers exceptionally high chemical resistance.
• Styrene-free, low odor, seismic approval C1 & C2, fire resistance F120, low VOC content A+.
• Store partially used cartridge with mixer on. Reusable until expiry date marked on the product label, if stored properly. Change mixer before reusing. Designated mixing nozzle included with each cartridge.
• Suitable conditions related to stud and rebar material qualities: ZP for dry indoor and temporary outdoor use; HGD/MG and A2 for dry and humid indoor use, outdoor in rural areas only; A4 for indoor, outdoor and industrial use; HCR for extremely corrosive conditions.